• Material: ABS
• Color: silver,black,rose gold
• Size: 17.52 x 10.94 x 3.11 inches（44.5*27.5*8cm）
• Suitable for connector size: diameter 20.2-20.8mm),Need other size, pls contact us.
• Including two modes: Rear wash (strong water pressure) and female wash (relatively weak water pressure)

Why Choose SAMODRA Ultra-Slim Bidet Attachment?

Durable Brass Water Inlet

The brass water inlet is connected with the brass valve inside the bidet to form a solid overall structure. Significantly reduce the product loss and the risk of water leakage, and effectively extend the service life of the bidet.

T-Adapter (1/2" )

The metal T-adapter has impact resistance and corrosion resistance, will provide excellent support to ensure the smooth operation of the bidet.

Braided Steel Hose

Our hose are upgrated from cheap plastic hoses to braided steel hoses to avoid rupture caused by high water pressure or prevent leakage due to the fragile of the hose because of long-term use.

SAMODRA Ultra-Slim Dual Nozzle Bidet Attachment

Non-electronic bidet with high-grade accessories, compatible with most toilets. Easy installation into your standard 2-piece toilet in minutes without plumbers.

Package Includes:

1 * Ultra-Slim Bidet Attachment

1 * Braided Metal Hose

1 * Brass T-adapter (American standard)

2 * Fixing Plates

1 * Rubber Washer

1 * Installation Instructions

It is also a good idea to prepare a surprise for a dear elder or a close friend.

~

Step 1:

Shut off the water supply valve on the wall. Then drain all the water in the toilet tank.

Remove the toilet seat, place the bidet on the toilet, align the toilet seat hole with the adjustable plate hole of the bidet, and finally put the toilet seat back on the toilet.

Step 2:

Inspect unit, accessories and their parts. Make sure T-Adapter has the black rubber washer (The black rubber washer must be placed on the T-Adapter adapter as shown in the figure).

Step 3:

As shown in the figure: Try connecting all parts that need connection to make sure that they fit.

Optional: Apply thread seal tape to the threads of the bidet water inlet and T-Adapter.

1. Connect the T-Adapter to the toilet tank water inlet. Hand tighten.

2.Connect the other end of the metal braided metal hose to the T-Adapter. Hand tighten.

3.Connect the existing water supply flexible hose to the other end of the T-Adapter. Hand tighten.

Step 4:

Connect one end of the flexible braided metal hose to the water inlet of the bidet. Hand tighten.

Open the water supply valve.

Check connections for water leaks.

Tighten connections where there is a leak until leak stops.

1.Multi Functional Comfortable Bidet
\nIt includes two modes: Rear wash (strong water pressure) and female wash (relatively weak water pressure)

When the bidet is in use, the nozzle extends downward to spray water, and the nozzle automatically shrinks to its original position after being closed. Protect the nozzle to the greatest extent, and ensure to provide a cleaning conditions during use.

Adjustable water pressure: the greater the angle of rotation, the greater the water pressure.

2.NOZZLE PROTECTION DESIGN

4.Care for family or friends

5.high quality Accessories
\nsamodra bidet is made of environmental friendly ABS material. Accessories are brass T-shaped adapter and braided steel cold water hose. The overall quality of the toilet seat accessories of the bidet is optimized, the traditional plastics are replaced, and the durability and cost performance of the bidet are improved.

EASY TO INSTALL

Please check the connector size for your pipe before order,tks.